The cabinet base shall be made of cold-rolled steel plate with a thickness of not less than 2mm, which shall be hot-dip galvanized after welding.
The metal materials used for the cabinet shall have the ability to resist corrosion and electrochemical reaction after or without surface treatment.
Non metallic parts (including insulated wires, cables and foaming materials) shall be flame retardant materials, and their flammability shall meet the requirements of flame retardant test.
The coating surface shall be continuous and uniform, the texture shall be consistent with the corresponding standard template, and there shall be no defects such as nodulation, shrinkage, blistering, pinhole, cracking, peeling, chalking, particle, sagging, bottom exposure, inclusion of dirt, etc.
For cabinets without spraying treatment, the gloss and texture of the external surface shall be uniform and beautiful.
After the adhesion test, the coating on the cabinet surface meets the requirements of grade 1 in Table 1 of gb/t 9286-1998.
After the impact resistance test, the coating on the cabinet surface is free of radial cracks, notches and other defects.
The coating on the cabinet surface is anti-aging.
After the solvent resistance test of the coating on the cabinet surface, there shall be no loss of light, obvious discoloration or wiping on the surface by visual inspection.
Quick Links: Sheet Metal Parts Components | Aluminium Bow Mount Bracket | Sheet Metal Frame | 4×4 Corner Brackets | Sheet Metal Chassis | Decorative Corner Brackets | U Shape Bracket | Powder Coating Small Parts | China Sheet Metal Manufacturer | Sheet Metal Cover | Metal Frame Brackets | Sheet Metal Mounting Brackets | Sheet Metal Brackets | Kiosk Enclosure Manufacturer | Metal U Bracket | Sheet Metal Enclosures | Custom Sheet Metal Parts | Metal Enclosure Manufacturers | Sheet Metal Cabinet | China Sheet Metal Parts | Power Cabinet | Cabinet Power | Distribution Cabinet | Cabinet Distribution | Power Supply Cabinet | Cabinet Power Supply | Sheet Metal Bracket | Sheet Metal Parts Manufacturer | Sheet Metal Mounting Bracket | Custom Electrical Enclosures | Outdoor EV Charger Enclosure | Custom Sheet Metal Boxes | Custom Steel Parts | Sheet Metal Components | Sheet Metal Prototype | Prototype Sheet Metal Parts | Precision Laser Cutting | Custom Sheet Metal Enclosures | Sheet Metal Box | Precision Sheet Metal Frames | Metal Enclosure Manufacturer | Prototype Sheet Metal | Custom Made Metal Parts | U Shaped Bracket | Sheet Metal Box Fabrication | Sheet Metal Bracket | China Metal Manufacturing | Stainless Brackets Marine | Custom Aluminum Parts | China Custom Aluminum Parts | Aluminum Parts Manufacturing | Metal Manufacturing in China | Custom Electrical Enclosures | Custom Electrical Enclosures Manufacturer | Custom Aluminum Enclosure